Aggiusta la tua roba Comunità Store

Il G4 Quicksilver può avere le seguenti configurazioni: - Single 733 MHz (Quicksilver) - Single 867 MHz (Quicksilver) - Dual 800 MHz (Quicksilver) - Single 800 MHz (Quicksilver 2002) - Single 933 MHz (Quicksilver 2002) - Dual 1 GHz (solo per Quicksilver 2002)

49 Domande Visualizza tutte

Opzioni

When I boot up, it doesn't

When the window with the blue bar looks to be finished it just keeps scrolling and the computer doesn't boot. I've tried to use the CD disk an it won't recognize the drive with "C" pressed at start up. I've tried to select a different startup drive, re-set the PRAM and all the combinations. I am running Mac OS X but was using OS 9 with an older Photoshop app the last time it was working. Please help! If you recognize the problem and I need to get it serviced, is my hard drive toast? Or, is there hope?

Thanks, Lucy

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio -1
2 Commenti

Have you connected it via firewire to another mac and tried the target modus?

da

Test the drive in another box or boot to an external drive?

da

Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Soluzione Prescelta

Opzioni

Lucy I seem to recall that sometimes the computer can become confused in a dual boot situation. You may have tried this but here is a link for the option start that may help. You might also try Option X on boot and see if you can get into OS 10 to sort this out, Ralph

http://support.apple.com/kb/HT1310

Questa risposta è stata utile?

Sì No
Punteggio 2

1 Commento:

good + also Lucy, how was your date and time holding up? Were they correct? Was your printer dropping off line?

da

Aggiungi un commento

Aggiungi la tua risposta

Lucy McKay sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 7

Tutti i Tempi: 2,007