Salta al contenuto principale

Model No. A1367 / 8, 16, 32, or 64 GB capacity

everything is working fine except from the home button

After replacing my iPod's front panel everything is working fine except from the home button, it is unresponsive.

If I press the switch directly it works, but not if I use the button! May the button have been damaged during the repair?

Thanks in advance!

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

2 Risposte

Soluzione Prescelta

Under the button you see a spring. Sorry don't have a picture right here. The button only shorts this spring so the two gets contact. Try (very carefully since it can easily break) to lift up the spring so it is easier to short it. I remember I had the same problem and the spring was broken so I had to lift up what was left so it came in contact with the button. Don't remember if there are two springs but you see what the button is supposed to make contact with. Hope it helps!

Questa risposta è stata utile?

Punteggio 1

1 Commento:

Ummm.... I can't see the spring... iPod touch 4th Gen is supposed to have it? :S

da

Aggiungi un commento

It's not a spring it's a little black peice that sits up slightly it's common for this to break off

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

luciacossio sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 2

Tutti i Tempi: 130