Aggiusta la tua roba Comunità Store

Modello fine 2011, A1278 / processore i5 2,4 GHz o i7 2,8 GHz

592 Domande Visualizza tutte
Domanda Chiusa

Opzioni

Unrecognized battery after HDD and RAM upgrade

After everything done, following your guide. The mac is working properly, except for the battery, that is working, as i can sometimes turn on the mac, with a loud fan noise on battery mode.

With AC power connected it runs good, but there's a cross on the battery indicator, indicating that there no battery.

How can i solve this? what steps should i follow exactly to make my battery recognizable again?

(tried already some solutions, on plugging/unplugging the battery connector with and without AC power plugged in)

Thanks in Advance

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 1

2 Commenti:

Is the X red or black?

da

Did you solve that? i have exactaly the same problem on the same model

da

Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

it's black;

update: the apple hardware test don't recognize any problem. Tried several ways to do de SMC reset, with no results whatsoever (that includes the shift+ctrl+cmf+power several ways; and the unplugging of the battery connector, followed by the "battery reset" (if i can call it so...)

i still think the battery alive, since i've managed to turn on the pc on battery twice (thus the cross was still there, and the fan's were working at full speed)

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 4

Tutti i Tempi: 199