Opzioni

Not sure if I have a battery

I replaced my magsafe connector and the battery on my MacBook Unibody Model A1342 at the same time. Now I have no power without the laptop being plugged in.

I had kind of accepted the fact that I fried my logic board however it seems that now when it is unplugged it keeps it's state in memory, like it's waking up from a deep sleep. It goes to sleep and sometimes shuts down when I unplug it. Does not wake up unless it is plugged in and I press the power button.

I tried switching back to the old magsafe connector and battery but it did not change anything. Is my logic board fried or is it something else?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Sì No

Punteggio 0

1 Commento

I did reset PRAM and tried to reset SMC. no luck

11 giu 2014 da raharrod

Aggiungi un commento

Postato: 11 giu 2014

Opzioni

You need to know what's going on with your battery. Download and run Coconut Battery and let us know your results: http://www.coconut-flavour.com/coconutba...

Questa risposta è stata utile?

Sì No

Punteggio 1

3 Commenti:

BATTERY STATUS: good, Battery temp: 35.2, Charging with: 0.0 watts, Battery state: discharging

It always says it's at 99%

11 giu 2014 da raharrod

It's like there is a connection to the battery but it is only very slight.

12 giu 2014 da raharrod

Put the old battery back in and run Coconut Battery.

12 giu 2014 da mayer

Aggiungi un commento