Salta al contenuto principale

The fourth Google Nexus smartphone, released November 13, 2012.

88 Domande Visualizza tutte

Nexus 4 screen regularly blacks out when make a call

The screen on my Nexus 4 regularly blacks out when I make a phone call. This has got worse since I had the screen replaced recently. I can hear the call but I cannot then use the screen to switch to speaker and worst of all I cannot disconnect the call. If I keep intermittently pressing the on/off button the screen will flash intermittently and if I keep hitting where the disconnect bar is I can after a while hit it just at the right time and I get my screen back. Nightmare! Is there a remedy to this fault?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1
Aggiungi un commento

Kit per Apple Watch

Screen and battery repairs just got easier.

Acquista ora

Kit per Apple Watch

Screen and battery repairs just got easier.

Acquista ora

6 Risposte

Its not actually a fault, its so your phone doesn't start ending your call or changing things when its pressed up against your face, as this activates the touch screen similar to when your fingers move across the screen. If you remove it from your face and wait a few seconds at most it will switch the screen on again and you can end your call.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

You CAN make it so that lock button ends your call in settings, have a look under settings for how to do this or do a quick Google search :)

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

the problem is associated with the proximity sensor. in order to fix it just remove the screen protector from that region. mind you it is not a software or hardware problem. its just the type of proximity sensor in the nexus 4. due to this you are advised to use thin screen protectors or just avoiding the sensor area.

trust me it works.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Do you use a display foil? If yes, check if the foil covers the distance sensor in the upper left of the phone.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

I have had the same problem also since replacing the screen.

I am not certain but i think the problem might be a screen protector on the inside sensor porthole - one which needs to be peeled off before installation. I tried doing this before fitting the new screen but couldn't just peel it off. I ended up sort of scratching it off badly with some bits left behind.

Either way it still didn't work for me but if what people say about screen protectors is anything to go by this could be an issue.

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

The remedy is a weird one.

You must remove the logic board. When you do this you will see the proximity sensor on it has a black rubber covering with two holes. One big and one small.

Take the rubber covering off and flip it.

I'm not sure why it works, but I've used this to fix this problem dozens of times

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Jashim Quraishi sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 9

Tutti i Tempi: 2,273