Aggiusta la tua roba Comunità Store

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 Domande Visualizza tutte

Opzioni

LCD flickering after digitizer replacement. Tried new LCD, still same.

The LCD had no issues when the customer brought in the ipad mini. When I replaced the digitizer, the lcd was all greyed out and 2 black lines running down the middle. I assumed it was a bad LCD so I tried a new one and the same problem persists. Could this be a board issue? If so, is there a fix?

Tried hard reset, same issue.

Original LCD http://imgur.com/tonBntl

New LCD http://imgur.com/NZk3zeS (red is to protect customors identity, not on actual lcd)

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio -1
Aggiungi un commento

2 Risposte

Filtra per:
Più utili Più recenti Più Vecchio

Opzioni

This is probably a logic board issue. What most likely happened is that a connector was damaged. You may need to replace it.

Questa risposta è stata utile?

Sì No
Punteggio 0

1 Commento:

Thanks, that's what we thought. We'll try apple and see what they have to say.

da

Aggiungi un commento

Opzioni

Were you able to fix your problem? I am confronting the same issue. The screen is flickering(the image jump and jump all over the screen) Both LCD I have tested so far are broken inside, so I don't know if this flickering is caused by the broken LCD or by the connector.

Let me know, thanks!

Questa risposta è stata utile?

Sì No
Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

Robert sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,042