Rep: 1
1
What is holding down the front glass on a iMac A1225-2211 iMac 8.1 24"
Iunderstand you just remoce the glas by lifting it up. looking to find out what holds the glass in place and where the contact points are?
Ron.neufeglise@ctv.ca
Questa è una buona domanda?
Rep: 2,5k
15
9
9
I just used a couple of suction cups that were holding our soap dish to the shower wall. There is a guide at iMac Intel 24" EMC 2267 Glass Panel Replacement.
Questa risposta è stata utile?
Rep: 35,1k
140
71
53
The glass is held by 14 magnets, thats why you only need 2 suction caps to remove it
Questa risposta è stata utile?
Rep: 13
1
Actually, you only need 1 suction cup ....
http://www.harborfreight.com/4-1-2-half-...
This is all I use, and for only $2.99 even! Best priced tool I have ever bought, use it for more than just iMac glass.
Questa risposta è stata utile?
Rep: 13
2
Even easier, I used a small piece of clear packing tape. Worked fine and left no residue. The amount of force needed is very small, just be careful not to break the pins by rotating the glass as you pull it off.
Questa risposta è stata utile?
Ultime 24 Ore: 0
Ultimi 7 Giorni: 2
Ultimi 30 Giorni: 3
Tutti i Tempi: 4,016
1 Commento
Thanks for the info . It removed very easily
da Ron Neufeglise