Salta al contenuto principale

Modello A1136 con 30, 60, o 80 GB di hard disk con plastica frontale bianca o nera

797 Domande Visualizza tutte

Replaced the hold switch and now click wheel is not working.

I have pulled apart my 30GB iPod video again to make sure I didn't miss anything. I have also done a restore with Itunes. The reset function works fine (holding the menu and center button until reboot). Toggling the hold switch on and off works fine as well. No response at all on any of the buttons other than the reset function. Please help!

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 4
Aggiungi un commento

4 Risposte

Risposta Più Utile

Retake it apart. Buttons may be stuck.

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

The click wheel has to align in a specific way...if im not mistaken 3 little holes on the bottom of the click wheel button should help you align with ribbon cable...do you hear click sounds when pressing the button?...if not then its not align properly

Questa risposta è stata utile?

Punteggio 2
Aggiungi un commento

Check and recheck all ribbon cable connections, this is most likely where the problem is. Sometimes they appear all the way in but are not quite making contact.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

When openning you broke your click wheel cable or you dont have it grounded because the tail ribbon of the clickwheel came of the frame of the iPod so know you iPod will not work

I hope this helps

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento

Aggiungi la tua risposta

gary sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 12

Tutti i Tempi: 6,555