Where is the storage for the IPADs? How can I increase the chip and put in more storage space?

⟐ Answer accepted febbraio 10, 2018 at 11:51 GMT-7

Is that make the lcd no display at all?

I try to check baclight components all work.

Thanks

Here the component that missing.

⟐ Commented dicembre 29, 2017 at 11:00 GMT-7

⟐ Answered novembre 21, 2017 at 0:01 GMT-7

I cracked the screen on my iPad mini and tried fixing it myself. I first tried replacing only the glass screen, and the right side wasn't working when I try touching it, which is where the crack was on the old screen. So I figured maybe the LCD screen doesn't work, so I just replaced that too, and the right side doesn't work still. It shows all the apps and stuff, but gives no touch response. Anyone know why it would do this? I followed step by step instructions perfectly to try and get it right. Could it be a bad digitizer, or would this happen if it got bent at all maybe? Any help is appreciated. Thanks

⟐ Commented ottobre 30, 2017 at 13:47 GMT-7

Thanks,

Bob

⟐ Answered settembre 28, 2017 at 0:00 GMT-7

⟐ Answered maggio 06, 2017 at 9:35 GMT-7

The unit had been dropped and when I removed the cracked glass there were two of the zif connectors locking bars loose in the case.

I replaced the glass put everything back and turned the unit on, it works fine except there is a dark band down the left side of the screen, when i rotate the unit the dark band is evident.

Is this because the LCD zif socket locking bar is broken and how could this be repaired, if possible?

Thanks in advance

⟐ Commented marzo 09, 2017 at 18:18 GMT-7

I've replaced the digitizer and LCD on many iPads before. But today when I replaced a digitizer, I was greeted with no backlight after screen replacement. After I power cycled it, the backlight was working but it was stuck on an Apple logo before finally showing connect to iTunes.

I've disconnected the battery and reconnected but to no avail. Now when I try to select update on iTunes, all it does is show the loading bar and doesn't do anything.

I haven't tried restore yet because I don't want to lose data. Is there any solution to this?

⟐ Commented febbraio 28, 2017 at 21:39 GMT-7

⟐ Commented dicembre 16, 2016 at 9:32 GMT-7

My friend purchased an iPad mini from target about 6 months ago, on sale of course. (model a1432. Shipped it out to his daughter, in Texas a University student. She wanted it for "school".

Lasted her 4 months (I've had it for 2). The same story everyone online's been complaining about: 'battery was dying put it to charge for an hour, came back & was never able to be turned on again.'

Apple won't warranty it cause it was dropped on its side (they suspected it was tampered with). Visited 2 Apple stores & same accusation. So he asked me to have a crack at it.

Now HERE'S WHERE THE TROUBLE STARTS

I've done it all!

• Held the wake button & home button thing.
• Left it charging for an hour.
• Tried resetting it to factory settings. My computer doesn't see it or know its there.
• Disconnected the battery and plugged it in to the power outlet.
• Replaced the battery.
• Placed the Magnets back where they are supposed to go

NOTHING - It's lifeless.

I'm thinking it's the Logic Board or the Dock Connector (no there isn't any dirt in the Dock Connector). Any Ideas? any one?'''

⟐ Commented settembre 17, 2016 at 12:50 GMT-7

⟐ Commented agosto 15, 2016 at 19:18 GMT-7

I called several computer places around me who said they don't do it; they send it out for $130 but would not use my screen I bought from iFixit.

I'm pretty handy, have the new screen and can follow directions. I've seen a few you tubes on how to do this.

Have any of you replaced your screen? Would you advise me to try this on my own? Any tips?

Mare

⟐ Answered aprile 23, 2016 at 12:02 GMT-7

⟐ Answered marzo 18, 2016 at 9:19 GMT-7

If they open it and try to repair/exchange the lightningsocket (or whatever its called) apple warranty is void. (Ipad is just about 2 month old)

Now on the other hand apple probably wont repair but just offre an replacement for unbelievable 380 €!!!! 380 € because a loading cable broke!!!! And apple build this thing in a way thats a) hypersensitive and b) refuse to repair it!

I really hope anybody here has got a better idea?

thanks!

⟐ Answered febbraio 24, 2016 at 3:45 GMT-7

A friend gave me her iPad to fix after the digitizer stopped responding. Everything else seems to work fine. The first few times it came back after putting it in Recovery Mode. Finally that stopped working so I did a Total Restore. Now it's stuck on the "Hello" screen and won't go any farther without a swipe.

I took it apart and there were no loose or cracked cables or connectors, so I ordered a replacement digitizer. Replacing the digitizer, and inserting the cable until the white line was gone, had no effect. LCD and all buttons seem to work fine. Is it possibly a logic board issue?

⟐ Answered febbraio 20, 2016 at 16:24 GMT-7

I'm looking at repair instructions for "iPad Air Wi-Fi Front Panel Assembly Replacement" by Author: Sam Lionheart. Sostituzione vetro e digitizer iPad Air Wi-Fi

Thanks!

⟐ Commented febbraio 10, 2016 at 23:20 GMT-7

By not removing the battery first have i blown the backlight? I dont have a clue about soldering so really want to avoid this route. Any other options?

⟐ Answer accepted febbraio 07, 2016 at 11:57 GMT-7

⟐ Commented ottobre 10, 2015 at 7:51 GMT-7

Would said device work? If not, what's keeping it from working?

This is an intriguing question for me, because it would save said random person $300, if they bought a display assembly from a parts website.

⟐ Commented maggio 28, 2015 at 14:00 GMT-7

⟐ Answered aprile 09, 2015 at 5:30 GMT-7