Introduzione

Removing the power cord is straightforward, but it does require soldering.

Using the Phillips-head #2 screwdriver,  unscrew the three 1cm Phillips-head screws on the plastic base of the toaster to separate the outer metal shell from the plastic base. Using the Phillips-head #2 screwdriver,  unscrew the three 1cm Phillips-head screws on the plastic base of the toaster to separate the outer metal shell from the plastic base.
  • Using the Phillips-head #2 screwdriver, unscrew the three 1cm Phillips-head screws on the plastic base of the toaster to separate the outer metal shell from the plastic base.

Aggiungi Commento

Push the plastic push-down handle down and pull the plastic handle straight from metal arm.
  • Push the plastic push-down handle down and pull the plastic handle straight from metal arm.

Aggiungi Commento

Loosen the outer metal shell from the plastic base by holding the plastic base while pulling up on the metal shell.
  • Loosen the outer metal shell from the plastic base by holding the plastic base while pulling up on the metal shell.

  • Only lift the outer shell a little so as not to disconnect the cables that connect the circuit board.

Aggiungi Commento

Disconnect the cable clips from the circuit board using the tweezers to free the outer metal shell from the plastic base. Disconnect the cable clips from the circuit board using the tweezers to free the outer metal shell from the plastic base.
  • Disconnect the cable clips from the circuit board using the tweezers to free the outer metal shell from the plastic base.

Aggiungi Commento

Lift the top outer metal shell. Carefully lift the outer metal shell at an angle so as not to damage the components in the front of the toaster.
  • Lift the top outer metal shell.

  • Carefully lift the outer metal shell at an angle so as not to damage the components in the front of the toaster.

Aggiungi Commento

Using a flat-head screwdriver, pry the power cord from the base of the toaster.
  • Using a flat-head screwdriver, pry the power cord from the base of the toaster.

Aggiungi Commento

Using a flat-head screwdriver, pry the white wire from the base.
  • Using a flat-head screwdriver, pry the white wire from the base.

Aggiungi Commento

Locate the circuit board at the front of the toaster where the power cord and white wire meet.
  • Locate the circuit board at the front of the toaster where the power cord and white wire meet.

  • Pull the circuit board up and out to free the circuit board from the body of the toaster.

  • It is tightly fit and may take moderate force to remove.

Aggiungi Commento

Desolder the power cord from the circuit board at the locations show in the diagram. For soldering instructions see the iFixit Soldering Guide.
  • Desolder the power cord from the circuit board at the locations show in the diagram.

  • For soldering instructions see the iFixit Soldering Guide.

  • The wires should be free from board when un-soldering is complete.

Aggiungi Commento

Unscrew the two 1.5cm Phillips-head screws at the back of the toaster that are holding the power cord in place to remove the retaining clip. Remove the plastic retaining clip that is holding the cord in place.
  • Unscrew the two 1.5cm Phillips-head screws at the back of the toaster that are holding the power cord in place to remove the retaining clip.

  • Remove the plastic retaining clip that is holding the cord in place.

Aggiungi Commento

Untie the knot in the power cord. Untie the knot in the power cord.
  • Untie the knot in the power cord.

Aggiungi Commento

Pull the cord from the base to remove the cable.
  • Pull the cord from the base to remove the cable.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Timothy Grijalva

Membro da: 31/01/2014

210 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 13-15, Regan Winter 2014 Membro di Cal Poly, Team 13-15, Regan Winter 2014

CPSU-REGAN-W14S13G15

5 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 309