Introduzione

Replace the power fuse for the Onkyo TX800 receiver.

Remove the two screws on both sides of the receiver. Keep these and the rest of the screws in a safe place. Remove the two screws on both sides of the receiver. Keep these and the rest of the screws in a safe place. Remove the two screws on both sides of the receiver. Keep these and the rest of the screws in a safe place.
  • Remove the two screws on both sides of the receiver. Keep these and the rest of the screws in a safe place.

Aggiungi Commento

Remove the top screw on the back panel. Remove the top screw on the back panel.
  • Remove the top screw on the back panel.

Aggiungi Commento

Slide off the case to expose the internal components of the receiver. Slide off the case to expose the internal components of the receiver.
  • Slide off the case to expose the internal components of the receiver.

Aggiungi Commento

Locate the fuse. Locate the fuse.
  • Locate the fuse.

Aggiungi Commento

Gently wedge a small screwdriver in between one side of the fuse and the contact. Remove the fuse with your thumb and forefinger.
  • Gently wedge a small screwdriver in between one side of the fuse and the contact.

  • Remove the fuse with your thumb and forefinger.

Aggiungi Commento

Examine the fuse. If the wire within it is broken, you will need to replace it with a new, 125 Volt, 4 Amp fuse.
  • Examine the fuse. If the wire within it is broken, you will need to replace it with a new, 125 Volt, 4 Amp fuse.

Aggiungi Commento

Linea Traguardo

Altre 4 persone hanno completato questa guida.

Michael Lady

Membro da: 09/04/2010

238 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 27-92, Amido Spring 2010 Membro di Cal Poly, Team 27-92, Amido Spring 2010

CPSU-AMIDO-S10S27G92

4 Membri

7 Guide realizzate

Thanks for clear instructions!

Andy Dersch - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 26

Ultimi 30 Giorni: 131

Tutti i Tempi: 7,716