Introduzione

Follow this guide to remove and replace the USB cable of your webcam. Knowledge of soldering is necessary in order to install a new cable.

Remove the two 8mm Phillips#0 screws on the back cover. The motherboard is attaching the two covers together, so don't separate them entirely just yet.
  • Remove the two 8mm Phillips#0 screws on the back cover.

  • The motherboard is attaching the two covers together, so don't separate them entirely just yet.

  • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

Aggiungi Commento

Remove the four 6mm Phillips#0 screws  connecting the motherboard and front cover. DO NOT detach the wire connecting the motherboard to the front cover.
  • Remove the four 6mm Phillips#0 screws connecting the motherboard and front cover.

  • DO NOT detach the wire connecting the motherboard to the front cover.

Aggiungi Commento

Grasp the white wire connector on the back of the motherboard to remove the USB cable. Wiggle the connector back and forth to remove it from the socket.
  • Grasp the white wire connector on the back of the motherboard to remove the USB cable.

  • Wiggle the connector back and forth to remove it from the socket.

Aggiungi Commento

Desolder the joint on the front of the motherboard to completely detach the USB cable. Follow this link to learn how to properly solder and desolder your parts.
  • Desolder the joint on the front of the motherboard to completely detach the USB cable.

  • Follow this link to learn how to properly solder and desolder your parts.

Aggiungi Commento

Wedge the pointy end of the spudger between the sliver E-ring and USB attachment base to extract the E-ring. Wedge the pointy end of the spudger between the sliver E-ring and USB attachment base to extract the E-ring. Wedge the pointy end of the spudger between the sliver E-ring and USB attachment base to extract the E-ring.
  • Wedge the pointy end of the spudger between the sliver E-ring and USB attachment base to extract the E-ring.

Aggiungi Commento

Feed the now free end of the USB cable through the back cover. Feed the now free end of the USB cable through the back cover.
  • Feed the now free end of the USB cable through the back cover.

sir where i baught logitech pro 9000 cable

Shiva Ji Sachan - Replica

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Cory Davis

Membro da: 14/04/2013

236 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 12-34, Amido Spring 2013 Membro di Cal Poly, Team 12-34, Amido Spring 2013

CPSU-AMIDO-S13S12G34

4 Membri

8 Guide realizzate

Ich habe auch. ich braucht neu Kabel für C910 aber wo finden?

wohlgemuth1981 - Replica

where i baught pro 9000 Cable

Shiva Ji Sachan - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 49

Tutti i Tempi: 4,089