Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 1
Passo 1
-
Close the laptop and flip it over so that the base is facing upward.
-
Using the JIS #0 screwdriver tip unscrew all 10, M2X4 size screws holding down the lid.
-
Using a spudger pry the bottom lid of the laptop from the rest of the laptop.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.