Salta al contenuto principale

10.5寸 iPad Pro拆解

Inglese
Cinese

Traduzione in corso passo 4

Passo 4
iPad Pro 10.5" Teardown: passo 0, immagine 1 di 3 iPad Pro 10.5" Teardown: passo 0, immagine 2 di 3 iPad Pro 10.5" Teardown: passo 0, immagine 3 di 3
  • Right about now, Apple's earning a pat on the back for using Phillips screws over the display cable bracket—unlike those pesky tri-point screws we uncovered in the iPhone 7 (Plus).

  • They also connected the display cable near the Lightning port instead of dead center, making repairs slightly less awkward.

  • But it does look as though we'll have to remove another heavily glued-in logic board. Let's cross our fingers for battery pull tabs!

  • While planning our attack, we flip the switch on our X-Ray vision (courtesy of our friends at Creative Electron) to peek behind all those black boxes.

现在,苹果在显示电缆的支架上使用了飞利浦螺丝钉,而不是我们在iPhone 7 上发现的令人讨厌的三点螺丝。与此同时,苹果赚了不少钱。

他们还将显示电缆连接在闪电端口的附近,而不是链接在“死中心”。使修复显得不那么糟糕。

但是看起来它还需要让我们移除另一块被胶粘死的逻辑板。让我们在电池拉环上交叉我们的手指

当我们准备对其发起进攻时,我们打开了X光透视的开关(由我们的好友Creative Electron提供)来研究所有的这些黑盒子。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.