Aggiusta le tue cose Community Store

Remplacement du boitier avant et arrière du Removing Nikon Coolpix 4600

Inglese
Francese

Informazioni Guida

= Fatto = Incompleto
    This installation guide will help you remove the rear and front casing of your Nikon Coolpix 4600.
    This guide will walk you through the steps to remove the front and rear casing of your Nikon Coolpix 4600 camera. This repair might be needed if the front or rear casing of your Nikon Coolpix 4600 is cracked, damaged, or malfunctioning due to drops, impacts, or general wear and tear. Removing and replacing the casings will resolve issues such as physical damage, malfunctioning buttons, or difficulty accessing internal components for further repairs. The repair requires careful handling and basic tools like screwdrivers and tweezers. One important consideration is that removing the casing involves working with small screws and connectors, so it's essential to keep track of all parts to ensure proper reassembly. Additionally, since the casing holds together critical parts of the camera, extra caution should be taken to avoid damaging internal components like the screen, lens, or motherboard.

      Passi guida

      Passo 1

      Repérez les six vis à l'extérieur de la caméra (2 3,3 mm en bas, 2 5,25 mm à gauche et 2 5,25 mm à droite).

      Passo 2

      Séparez soigneusement le boîtier avant et arrière.

      Passo 3

      Regardez attentivement la connexion entre le câble ruban et la carte mère. Repérez les deux languettes grises de chaque côté du support de connexion.

      I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.