Salta al contenuto principale

Comment rattacher la barre d’espace à un Magic Keyboard

Inglese
Francese

Traduzione in corso passo 5

Passo 5
How to reattach a Spacebar Key to the Magic Keyboard: passo 0, immagine 1 di 1
  • Position the bottom of the key in the opening with the top tilted up and away from the keyboard.

  • You may want to take the top bracket off the key and put it into its spot in the hole first. I've done this with it on and off.

  • Apply pressure starting from the bottom and slide your fingers up toward the top of the key.

  • You should hear and feel the two lower connections to the scissors. The top bracket should naturally be in the correct space.

  • You should be able to tap the key and feel normal action from the top part of it. No matter where you tap it on the top half.

  • Do not apply excess pressure. Previous Mac Keyboards you just pushed down hard and it worked. Apply only enough to seat the key.

Placez le bas de la touche dans l’ouverture, en inclinant le haut vers le haut et loin du clavier.

Vous voudrez peut-être enlever le support supérieur de la touche et le mettre à sa place dans le trou en premier. Je l’ai déjà fait des deux manières.

Appliquez une pression à partir du bas et faites glisser vos doigts vers le haut de la touche.

Vous devriez entendre et sentir les deux connexions inférieures au mécanismes à ciseau. Le support supérieur devrait s'insérer naturellement dans l’espace.

Vous devriez pouvoir appuyer sur la touche et sentir l’action normale de la partie supérieure de celle-ci. Peu importe où vous appuyez sur la moitié supérieure.

N’appliquez pas de pression excessive, comme cela était possible avec les claviers Mac précédents. Appuyez seulement assez pour insérer la touche.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.