Salta al contenuto principale

Sostituzione schermo iPhone 4S

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 10

Passo 10
iPhone 4S Screen Replacement, Display Assembly Installation: passo 0, immagine 1 di 2 iPhone 4S Screen Replacement, Display Assembly Installation: passo 0, immagine 2 di 2
Display Assembly Installation
  • To successfully install a new/replacement display assembly, note the following:

  • Remember to switch the home button from your old display to the new display (in most cases, this is not provided). The home button gasket is thin rubber, so care must be taken not to tear it. Also, check that the mesh for the speaker hole is present in the replacement; if not, move it over from the old display.

  • Be sure to peel off the protective backing (usually blue or pink) from the new panel before installing it.

  • If your replacement display does not come with a 7 mm clear plastic ring surrounding the front-facing camera, be sure to transfer it between the old and new display.

Per rimuovere con successo un gruppo display nuovo o sostitutivo, prendi nota di seguenti punti:

Ricordati di scambiare il pulsante home tra il vecchio display e il nuovo, dove di solito il pulsante home manca. La guarnizione del pulsante home e in gomma sottile, quindi stai attento a non piegarla. Inoltre, controlla che la griglia del foro dell'altoparlante sia presente nella parte sostitutiva; se non lo è, trasferiscila dal vecchio display.

Ricordati di staccare la pellicola protettiva (di solito azzurra o rosa) dal nuovo pannello prima di installarlo.

Se il tuo display sostitutivo non è dotato di un anello in plastica trasparente da 7 mm che circonda la fotocamera anteriore, trasferiscilo dal vecchio al nuovo display.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.