Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 8le guide che includono questo passo.
Traduzione in corso passo 1
Passo 1
-
Use the flat end of a plastic opening tool to flip up the retaining flap on the headphone jack and front-facing camera ribbon cable ZIF socket.
-
Run a plastic opening tool underneath the headphone jack and front-facing camera cable to free it from the adhesive attaching the cable to the rear panel.
-
Pull the headphone jack and front-facing camera ribbon cable straight out of its socket on the logic board.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.