Salta al contenuto principale

Sostituzione scheda UI Teenage Engineering OP-1

Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Teenage Engineering OP-1 UI Board Replacement: passo 0, immagine 1 di 3 Teenage Engineering OP-1 UI Board Replacement: passo 0, immagine 2 di 3 Teenage Engineering OP-1 UI Board Replacement: passo 0, immagine 3 di 3
  • Use a Phillips #00 screwdriver to remove the five screws on the UI board.

  • To each screw there is a thick washer to fix the board. Don't loose them.

Usa un cacciavite a croce Phillips #00 per rimuovere dalla scheda UI le cinque viti.

Per ogni vite c'è una spessa rondella per tenere in posizione la scheda. Stai attento a non perderla.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.