Salta al contenuto principale

Sostituzione batteria Teenage Engineering OP-1

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Teenage Engineering OP-1 Keyboard Replacement, Keyboard Connection: passo 0, immagine 1 di 2 Teenage Engineering OP-1 Keyboard Replacement, Keyboard Connection: passo 0, immagine 2 di 2
Keyboard Connection
  • Unlock the flex cables by pushing the two black nibs on both sides of each connector.

  • Now you can pull the flex cables out and remove the keyboard completely.

  • When installing the new keyboard, make sure to remove the protective film underneath the screen.

  • The OP-1 has a mode to test specific functions. You can enter it by holding the "COM" button while powering on, then choose the function test (2). You don't have to complete every test and can power off after the keyboard test.

Sblocca i cavi flessibili spingendo le due levette di bloccaggio nere disposte su entrambi i lati di ogni connettore.

Ora puoi tirare fuori i cavi flessibili e rimuovere completamente la tastiera.

Quando monti la nuova tastiera, accertati di aver rimosso la pellicola protettiva sotto lo schermo.

L'OP-1 ha una modalità per testare funzioni specifiche. Puoi accedere a questa modalità tenendo premuto il pulsante "COM" mentre accendi il dispositivo, e poi scegliendo la funzione test (2). Non c'è bisogno di completare tutti i test e puoi spegnere dopo aver eseguito quello della tastiera.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.