Aggiusta le tue cose Community Store

MacBook Air 11" 2011 中期 电池更换

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Cinese
Passo precedente

Traduzione in corso passo 3

Passo 3
MacBook Air 11" Mid 2011 Battery Replacement: passo 0, immagine 1 di 1

  • When handling the battery, avoid squeezing or touching the six exposed lithium polymer cells.

  • Lift the battery from its edge nearest the logic board and remove it from the upper case.

  • If you're installing a new battery, you should calibrate it after installation:

  • Charge it to 100%, and then keep charging it for at least 2 more hours. Next, unplug and use it normally to drain the battery. When you see the low battery warning, save your work, and keep your laptop on until it goes to sleep due to low battery. Wait at least 5 hours, then charge your laptop uninterrupted to 100%.

  • If you notice any unusual behavior or problems after installing your new battery, you may need to reset your MacBook's SMC.

当你握持电池时，避免挤压或者触摸六块暴露的锂离子电池。

从靠近主板的边缘提起电池，并将其从顶壳中取出。

在你使用的电池之前先 校准 它：

将其充电至100％，并继续充电至少2小时。拔下电源并正常使用以排空电池。当您看到低电量警告时，请保存您的工作，并保持笔记本电脑一直打开，直到它因电池电量不足而进入睡眠状态。等待至少5个小时，然后不间断地将笔记本电脑充电至100％。

在你安装好你的新电池之后，如果你注意到任何不寻常的举动或是问题，你可能需要重置你MacBook Pro的SMC。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.