Salta al contenuto principale

Sostituzione batteria Kindle Paperwhite 3a generazione

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Kindle Paperwhite 3rd Generation Battery Replacement, Using caution: passo 0, immagine 1 di 3 Kindle Paperwhite 3rd Generation Battery Replacement, Using caution: passo 0, immagine 2 di 3 Kindle Paperwhite 3rd Generation Battery Replacement, Using caution: passo 0, immagine 3 di 3
Using caution
  • Use extreme caution when prying up the bezel. Be careful not to allow your pry tool to fall underneath the display. Look under the cover as you work, separating the display from the adhesive of the bezel.

  • You want to make sure your separator goes through both sides of the bezel over top of the display.

  • The second photo is the layer you want your tool to pass through safely.

  • The third photo is an example of what can go wrong. If this happens your digitizer layer will misread touches and the display is permanently damaged.

Usa estrema cautela quando sollevi il telaio. Fai attenzione a non far cadere il tuo strumento di leva sotto il display. Guarda sotto il coperchio mentre lavori, separando il display dall'adesivo del telaio.

Assicurati che il tuo separatore passi attraverso entrambi i lati del telaio sopra il display.

Nella seconda foto è il livello attraverso il quale desideri far passare in sicurezza il tuo strumento.

Nella terza foto è mostrato un esempio di ciò che può andare storto. Se ciò accade, il tuo strato del digitalizzatore leggerà in modo errato i tocchi e il display sarà danneggiato permanentemente.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.