Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 2
Passo 2
-
With the three screws removed, take note of the two ribbon cables connecting the lens assembly to the main motherboard.
-
Use the tweezers to remove the two green strips of tape protecting the connectors.
-
Use the plastic opening tool to release the black clips locking in the ribbon cables, then use the tweezers to gently pull the ribbon cables away from the main motherboard.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.