Aggiusta le tue cose Community Store

Nintendo 3DS 하단 케이스 교체

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Coreano
Passo successivo

Traduzione in corso passo 1

Passo 1
Nintendo 3DS Lower Case Replacement: passo 0, immagine 1 di 1

  • Use a JIS #00 screwdriver to remove the nine 6.3 mm black screws from the lower case.

  • JIS (Japanese Industrial Standards) screws are not the same as Phillips. To avoid stripping these screws, make sure you are using a JIS #00 screwdriver and not a PHILLIPS #00 screwdriver. You can use a PHILLIPS #00 with a lot of downwards force but be warned this will deform the screw head and you risk stripping it.

  • iFixit's Phillips head screwdriver is desinged to reduce damage on JIS head screws so it should be fine to use, still apply more force. Make sure it's iFixit's official Phillips screwdriver as we are unaware of any other manufacturer who does this.

  • Use a JIS #00 screwdriver to remove the 2.4 mm silver screw above the game cartridge slot.

하단 케이스에 있는 검은색 6.3 mm 십자 나사 아홉 개를 풀어주세요.

이 나사는 올바른 크기의 비트를 사용하지 않으면 매우 쉽게 벗겨집니다. 나사가 벗겨지지 않도록 돌리는 동안 나사에 힘을 가하세요.

게임 카트리지 슬롯 위에 있는 2.4mm 은색 십자 나사를 풀어주세요.

-[* red] Remove the nine 6.3 mm black Phillips screws from the lower case.
-[* icon_caution] These screws will strip very easily unless you use the correct size bit. Apply pressure to the screws while turning to avoid stripping them.
-[* orange] Remove the 2.4 mm silver Phillips screw above the game cartridge slot.
+[* red] Use a JIS #00 screwdriver to remove the nine 6.3 mm black screws from the lower case.
+[* icon_caution] JIS (Japanese Industrial Standards) screws are ***not*** the same as Phillips. To avoid stripping these screws, make sure you are using a JIS #00 screwdriver and not a PHILLIPS #00 screwdriver. You ''can'' use a PHILLIPS #00 with a lot of downwards force but be warned this ***will*** deform the screw head and you risk stripping it.
+[* icon_note] iFixit's Phillips head screwdriver is desinged to reduce damage on JIS head screws so it should be fine to use, still apply more force. Make sure it's iFixit's official Phillips screwdriver as we are unaware of any other manufacturer who does this.
+[* orange] Use a JIS #00 screwdriver to remove the 2.4 mm silver screw above the game cartridge slot.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.