Aggiusta le tue cose Community Store

iPad 2 Wi-Fi EMC 2415 前置面板组件更换

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Cinese
Passo precedente

Traduzione in corso passo 4

Passo 4
iPad 2 Wi-Fi EMC 2415 Front Panel Assembly Replacement: passo 0, immagine 1 di 2 iPad 2 Wi-Fi EMC 2415 Front Panel Assembly Replacement: passo 0, immagine 2 di 2

  • In order to remove the front panel assembly, the ribbon cable needs to slide out between the case and the LCD. You'll need to move the LCD to make some room.

  • Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its cable will remain connected while it is rotated over.

  • Lift the LCD from its long edge farthest from the digitizer cable and gently flip it toward the rear case—like closing a book.

  • While holding the LCD up, gently slide the front panel away from the iPad. Be careful not to snag the digitizer cable on the rear case or LCD.

  • Set the LCD back into the body for safekeeping.

为了拆卸前面板组件，带状电缆需要从机箱和 LCD 之间滑出。您需要移动 LCD 以腾出一些空间。

移动 LCD 时要非常小心，不要尝试将其从 iPad 上移除——旋转时其排线仍保持连接状态。

从距离数字化仪排线最远的长边提起 LCD 屏幕，然后轻轻地将其翻转向后壳——就像合上一本书一样。

抬起 LCD 屏幕，轻轻将前面板从 iPad 上滑开。小心不要将数字转换器排线挂在后壳或 LCD 屏幕上。

将 LCD 放回机身以便妥善保管。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.