Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 1

Passo 1
Use the edge of a plastic opening tool to carefully flip up the retaining flaps on the two digitizer ribbon cable ZIF sockets. Be sure you are prying up on the hinged retaining flaps, not the sockets themselves.
  • Use the edge of a plastic opening tool to carefully flip up the retaining flaps on the two digitizer ribbon cable ZIF sockets.

  • Be sure you are prying up on the hinged retaining flaps, not the sockets themselves.

  • The retaining flaps are highlighted in red in the second picture.

Klappe die Haltebügel an den beiden ZIF-Sockeln der Digitizer Flachbandkabel vorsichtig mit einem Plastic Opening Tool um.

Achte darauf, dass du an den klappbaren Haltebügeln hebelst und nicht an den Sockeln selbst.

Die Haltebügel sind rot im zweiten Bild hervorgehoben.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.