Salta al contenuto principale

iPad Air 2 Wi-Fi Opening Procedure

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Coreano

Traduzione in corso passo 5

Passo 5
iPad Air 2 Wi-Fi  Opening Procedure: passo 0, immagine 1 di 3 iPad Air 2 Wi-Fi  Opening Procedure: passo 0, immagine 2 di 3 iPad Air 2 Wi-Fi  Opening Procedure: passo 0, immagine 3 di 3
  • Push the blue handle away from the hinge to engage opening mode.

  • Turn the handle clockwise until you see the cups start to stretch.

  • Make sure the suction cups remain aligned to each other. If they begin to slip out of alignment, loosen the suction cups slightly and realign the arms.

  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle clockwise half a turn.

  • Don't crank more than a half a turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next two steps.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.