Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 6

Passo 6
Remove the dual LED flash cover with a pair of tweezers. This is held on with a small amount of adhesive. Using a mildly heated pair of tweezers would ease the removal of flash cover as it helps weaken the adhesive . Remove gently as the flash cover may be glued to the antenna cable(s) below.
  • Remove the dual LED flash cover with a pair of tweezers. This is held on with a small amount of adhesive.

  • Using a mildly heated pair of tweezers would ease the removal of flash cover as it helps weaken the adhesive .

  • Remove gently as the flash cover may be glued to the antenna cable(s) below.

  • Use a pair of tweezers to disconnect the two antenna cables near the camera.

  • Some models of this phone will have only one antenna cable at this location.

  • Proceed to disconnect the antenna cable near the bottom right of the phone.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.