Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 5le guide che includono questo passo.
Traduzione in corso passo 8
Passo 8
-
Use a pair of tweezers to lift the vibrator out of its slot.
-
Use an iOpener or heat gun to loosen the adhesive at the bottom of the motherboard.
-
Use a plastic opening tool, or a spudger, along the edges of the case to gently pry the motherboard out of the case.
-
Gently lift the motherboard out of the case, beginning from the top corner (near the camera).
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.