Aggiusta le tue cose Community Store

Nintendo Wii Abdeckung der Hauptplatine ausbauen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Tedesco
Passo successivo

Traduzione in corso passo 1

Passo 1
Nintendo Wii Motherboard Cover Replacement: passo 0, immagine 1 di 1

  • Use a pair of tweezers to lift the fan connector up and out of its socket on the logic board.

  • Be sure your tweezers are clamped down on the fan connector, not the socket on the motherboard.

Hebe den Stecker des Lüfters mit einer Pinzette aus seinem Sockel auf der Hauptplatine.

Passe auf, dass du mit der Pinzette nur am Stecker angreifst, nicht am Sockel auf der Hauptplatine.

-[* black] Use a pair of tweezers to lift the fan connector up and out of its socket on the logic board.
+[* black] Use a pair of [product|IF145-020|tweezers] to lift the fan connector up and out of its socket on the logic board.
[* icon_caution] Be sure your tweezers are clamped down on the fan connector, ***not*** the socket on the motherboard.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.