Salta al contenuto principale

Sostituzione batteria portachiavi

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Car Key Fob Battery Replacement: passo 0, immagine 1 di 2 Car Key Fob Battery Replacement: passo 0, immagine 2 di 2
  • Optional: Use the pointy end of the spudger to remove some of the gunk/buildup within the key fob.

  • Insert the control module back into the key fob, making sure all the buttons line up with the holes.

  • Reattach the two halves of the key fob on the side opposite of the key first, then continue until the entire fob is back together in its original state.

  • Don't forget to put back the Phillips screw!

Opzionale: Usa la punta dello spudger per rimuovere la sporcizia accumulatasi nella chiave.

Reinfila il modulo di controllo nella chiave, assicurandoti che tutti i tasti siano allineati coi fori.

Riattacca le due metà del portachiavi iniziando dalla parte opposta alla chiave, continuando quindi fino a richiudere del tutto l'intero portachiavi.

Non dimenticarti di riavvitare la vite a croce Phillips!

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.