Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Unscrew the single Phillips screw on the back of the key fob using a #1 Phillips screwdriver. The two black plastic pieces should separate, revealing the control module. Lift out the control module from the rest of the key. The two black plastic pieces should separate, revealing the control module. Lift out the control module from the rest of the key.
  • Unscrew the single Phillips screw on the back of the key fob using a #1 Phillips screwdriver.

  • The two black plastic pieces should separate, revealing the control module. Lift out the control module from the rest of the key.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.