Salta al contenuto principale

iPad Mini 3 Wi-Fi LCDシールドプレート交換

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 3

Passo 3
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 1 di 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 2 di 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: passo 0, immagine 3 di 3
  • Carefully place a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

温めた側の中央部分より少し上辺りに、吸盤カップを取り付けます。

吸盤がしっかりとスクリーンに装着されるように、スクリーン上に完全に平らに付いているかを確認してください。

iPadを片手で押さえながら、吸盤カップを上部に向けて引っ張りあげます。

ピックを差し込むための充分なスペースを作るため、ガラスを引っ張り上げます。あまり持ち上げ過ぎるとガラスが割れる恐れがあります。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.