JD Razor 2000 Front Wheel Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Torna alla Guida

Inglese

Italiano

Passo successivo

Traduzione in corso passo 1

Passo 1

JD Razor 2000 Front Wheel Replacement, Removing the 1.75" Axle Bolt: passo 0, immagine 1 di 3

JD Razor 2000 Front Wheel Replacement, Removing the 1.75" Axle Bolt: passo 0, immagine 2 di 3

JD Razor 2000 Front Wheel Replacement, Removing the 1.75" Axle Bolt: passo 0, immagine 3 di 3

Removing the 1.75" Axle Bolt

Orient the scooter so that the front wheel is facing you. Observe the right and left side of the wheel. Remember which is which throughout the guide.
Using an Allen wrench, unscrew the axle bolt slowly from the right side while applying a constant pressure with your hand on the left side of the bearing.
If the left side of the bolt turns while you unscrew the right side, you will need to use a second Allen wrench to prevent it from moving
If the bolt does not move at all, or moves very little, try applying a lubricant on as much of the screw as possible and try again in 5 minutes.
Carefully pull apart the bolt and bearing from either side of the wheel.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.