Salta al contenuto principale

Sustitución de la cubierta trasera del iPhone 4

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 3

Passo 3
iPhone 4 Rear Panel Replacement: passo 0, immagine 1 di 1
  • Pinch the rear panel with your fingers and lift it away from the iPhone. Alternatively, use a Small Suction Cup .

  • Be careful not to damage the plastic clips attached to the rear panel.

  • If you are installing a new rear panel, be sure to remove the plastic protective sticker from the inside of the camera lens and the sticker from the large black area near the lens.

Pincha el panel trasero con tus dedos y levántalo del iPhone. Alternativamente, usa una Pequeña Ventosa de Succión.

Ten cuidado de no dañar los clips de plástico unidos al panel trasero.

Si estas instalando un nuevo panel trasero, asegúrate de remover el plástico protectivo del interior de los lentes de la cámara y el sticker de la gran área negra cerca de los lentes.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.