Aggiusta le tue cose Community Store

MacBook Pro 13" Retina-scherm eind 2013 Vervanging van de schermmodule

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Olandese
Passo successivo

Traduzione in corso passo 1

Passo 1
MacBook Pro 13" Retina Display Late 2013 Display Assembly Replacement: passo 0, immagine 1 di 3 MacBook Pro 13" Retina Display Late 2013 Display Assembly Replacement: passo 0, immagine 2 di 3 MacBook Pro 13" Retina Display Late 2013 Display Assembly Replacement: passo 0, immagine 3 di 3

  • Carefully peel the rubber fan bumper from the edge of the heat sink to expose the iSight camera cable adhered to the fan.

  • The fan bumper wraps around the heat sink and fits into the fan duct slots. During reassembly, be sure to fit the tabs into the notches in the fan duct.

Verwijder voorzichtig de rubberen ventilatorbumper van de rand van het koellichaam.

De ventilatorbumper wikkelt zich rond het koellichaam en past in de sleuven van het ventilatorkanaal. Zorg ervoor dat de lipjes tijdens de hermontage in de inkepingen in het ventilatorkanaal passen.

-[* black] Carefully remove the rubber fan bumper from the edge of the heat sink.
+[* black] Carefully peel the rubber fan bumper from the edge of the heat sink to expose the iSight camera cable adhered to the fan.
[* icon_reminder] The fan bumper wraps around the heat sink and fits into the fan duct slots. During reassembly, be sure to fit the tabs into the notches in the fan duct.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.