Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 7

Passo 7
Push a plastic card between the right-most battery cell and the upper case, cutting the adhesive between the two. Throughout this procedure, be careful not to damage any of the battery cells with your tools. A damaged lithium-ion battery may leak dangerous chemicals and/or catch fire. Use only plastic pry tools.
  • Push a plastic card between the right-most battery cell and the upper case, cutting the adhesive between the two.

  • Throughout this procedure, be careful not to damage any of the battery cells with your tools. A damaged lithium-ion battery may leak dangerous chemicals and/or catch fire. Use only plastic pry tools.

  • When using the hot iOpener method, if you encounter significant resistance to prying, stop and use the iOpener to reheat the section you're working on.

プラスチックカードを一番右側のバッテリーセルと上部ケースの間に押し込みます。バッテリーとケースの間の接着剤を剥がしていきます。

この作業中、差し込む際にかなりの抵抗力を感じることがあれば作業を中止して、再度温めたiOpener を該当箇所に配置して温めてください。

温めたiOpenerを使う方法で作業をする場合、こじ開ける作業でかなりの抵抗を感じたら、作業を一旦停止して何度も該当箇所に温めたiOpenerを載せて柔らかくしてください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.