MacBook Pro（13英寸，带有Retina显示屏，2013末）电池更换

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese

Cinese

Traduzione in corso passo 4

Passo 4

Pull off the black rubber stopper from your bottle of adhesive remover.
Twist to loosen or remove the bottle cap before you cut the applicator tip.
This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.
Use scissors to cut off the sealed tip of the applicator.
Cutting close to the narrow tip will give you better control so you can apply the adhesive remover in small amounts.
Twist and close the bottle cap securely before you proceed further.

拔出粘合剂清除剂的黑色橡胶塞。
在剪开口之前，扭一扭或者旋出瓶盖。
这样打开瓶身，使瓶内外气压一致。如果你跳过这一步，在剪开口的时候，粘合剂清除剂可能会意外迸出
用剪刀剪出一个开口
剪在靠近末尾尖端处来让流量变小，从而更好控制清除剂的施用。
在下一步之前，请扭一扭或者拧紧瓶盖。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.