Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 4

Passo 4
Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board. To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery. Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.
  • Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

  • Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.

  • Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

  • If you are having trouble fitting the battery blocker underneath the logic board, you can try using a playing card to disconnect the battery.

卸下将电池连接器固定到主板的 2.3 毫米十字螺丝。

为降低短路风险,你可以 插入电池隔离片或修改后的撬片来断开电池。

使用电池隔离片隔离电池时要非常小心。 电池触点容易损坏,造成不可逆转的损坏。

将电池阻挡器滑到主板的电池接口区域下方,并在工作时将其留在原位。

如果你在主板下方安装电池隔离片时遇到问题,你可以尝试使用扑克牌断开电池连接。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.