Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Set the blaster on its side with the screws facing up (the blaster will be placed on its left side).  Remove all 14 phillips head, 8.2 mm screws and set them aside. Lift the side of the blaster off exposing its internal parts. Lift the side of the blaster off exposing its internal parts.
  • Set the blaster on its side with the screws facing up (the blaster will be placed on its left side). Remove all 14 phillips head, 8.2 mm screws and set them aside.

  • Lift the side of the blaster off exposing its internal parts.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.