Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 6

Passo 6
In this step you will be transferring the smart cover magnets to the NEW front panel assembly. Use a pair of tweezers to carefully place the upper left smart cover magnet in place. Repeat the procedure with the bottom left smart cover magnet.
  • In this step you will be transferring the smart cover magnets to the NEW front panel assembly.

  • Use a pair of tweezers to carefully place the upper left smart cover magnet in place.

  • Repeat the procedure with the bottom left smart cover magnet.

  • If necessary, use the edge of a plastic opening tool to flatten the piece of tape adhered to the bottom left smart cover magnet.

この手順ではスマートカバーマグネットを新しいパネルアセンブリに移します。

ピンセットの先端を使って、丁寧に上部左側のスマートカバーマグネットを定位置に配置します。

スマートカバーマグネットの下部左側の部分でも同じ作業を繰り返します。

必要に応じてプラスチック製開封ツールの先端を使って、左側スマートカバーマグネット下部に貼るテープがまっすぐ平らにようにしてください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.