Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
If you're installing a new front panel assembly, it may need the following preparation: Peel the plastic strips covering the adhesive around the perimeter of the front panel assembly.
  • If you're installing a new front panel assembly, it may need the following preparation:

  • Peel the plastic strips covering the adhesive around the perimeter of the front panel assembly.

  • Remove the small piece of adhesive backing from the digitizer cable.

  • Make sure all copper is covered on the new replacement screen as once fitted without this the screen will move randomly.

新しいフロントパネルアセンブリに付け替える場合、次の準備が必要です。

正面パネルアセンブリの周囲の接着剤をカバーしているプラスチックストリップを剥がしてください。

デジタイザーケーブルから小さい接着剤シールを取ります。

全ての銅パーツが新しい交換スクリーン上で覆われていることを確認してください。もし覆われていない場合は、スクリーンがばらばらに動いてしまいます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.