Traduzione in corso passo 3
Passo 3
-
Use tweezers to gently remove the connector to the webcam by pulling the plug to the right (per orientation of the photo).
-
Allow the removed wire to hang in place but make note of alignment with respect to webcam.
- | [* red] |
---|---|
+ | [* red] Use tweezers to gently remove the connector to the webcam by pulling the plug to the right (per orientation of the photo). |
[* black] Allow the removed wire to hang in place but make note of alignment with respect to webcam. | |
[* icon_note] This step is performed while holding down the bezel which is only partially detached. |
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.