Sostituzione gruppo scheda madre e dissipatore Xbox Serie X

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Torna alla Guida

Inglese

Italiano

Passo precedente Passo successivo

Traduzione in corso passo 2

Passo 2

Xbox Series X Motherboard Removal (Thermal Paste/Putty): passo 0, immagine 1 di 3

Xbox Series X Motherboard Removal (Thermal Paste/Putty): passo 0, immagine 2 di 3

Xbox Series X Motherboard Removal (Thermal Paste/Putty): passo 0, immagine 3 di 3

Pinch the locking tab on the interconnect cable on the motherboard and use the flat end of a spudger to disengage the clip.
Pull the connector straight up and out of its socket.
During reassembly, insert the #1—SOC side of interconnect cable connector into its socket so the locking tab is facing outward. Then, press down on the edges of the connector until it snaps into place.

	[* black] Pinch the locking tab on the interconnect cable on the motherboard and use the flat end of a spudger to disengage the clip.
-	[* black] ~~Use your fingers to pull~~ the connector straight up and out of its socket.
+	[* black] Pull the connector straight up and out of its socket.
	[* icon_reminder] During reassembly, insert the *#1—SOC* side of interconnect cable connector into its socket so the locking tab is facing outward. Then, press down on the edges of the connector until it snaps into place.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.