Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 2le guide che includono questo passo.
Traduzione in corso passo 13
-
Before installing the mirror box, the shutter should be wound and the mirror released into the taking position (up against the focusing screen).
-
After mounting the mirror box, make sure all necessary wires are available through the bottom of the camera for soldering.
-
Check for proper coupling of the self timer and the shutter button release.
-
Check that the closing curtain latch sits forward of the mirror return latch.
-
Check that the FP switch lever holds the magnet lever.
-
Select one of the mechanical shutter speeds and test the function of the mirror and shutter. The camera should be capable of a complete exposure cycle at this point.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.