iPad 4 CDMA Home Button Control Board Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese

Coreano

Traduzione in corso passo 1

Passo 1

The two small notched trapezoidal strips will be used to attach the home button bracket to the front panel.
Carefully peel off the first trapezoidal adhesive strip with a pair of tweezers.
Using a pair of tweezers, place the first trapezoidal adhesive strip (minding its correct orientation) on the matching side of the home button mounting bracket.
Make sure to line up the profile of the strip with the edge of the mounting bracket.
Repeat the procedure for the second trapezoidal adhesive strip.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.