Aggiusta le tue cose Community Store

Remplacement de la carte du bouton home de l'iPad 4 CDMA

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Francese
Passo successivo

Traduzione in corso passo 1

Passo 1
iPad 4 CDMA Home Button Control Board Replacement: passo 0, immagine 1 di 2 iPad 4 CDMA Home Button Control Board Replacement: passo 0, immagine 2 di 2

  • The two small notched trapezoidal strips will be used to attach the home button bracket to the front panel.

  • Carefully peel off the first trapezoidal adhesive strip with a pair of tweezers.

  • Using a pair of tweezers, place the first trapezoidal adhesive strip (minding its correct orientation) on the matching side of the home button mounting bracket.

  • Make sure to line up the profile of the strip with the edge of the mounting bracket.

  • Repeat the procedure for the second trapezoidal adhesive strip.

Les deux petites bandes trapézoïdales entaillées seront utilisées pour attacher le support du bouton home au panneau frontal.

Décollez soigneusement la première bande adhésive trapézoïdale avec une pincette.

À l'aide d'une pincette, placez la première bande adhésive trapézoïdale (en tenant compte de son orientation correcte) sur le côté correspondant du support de fixation du bouton home.

Assurez-vous d'aligner le profil de la bande avec le bord du support de fixation.

Répétez la procédure pour la seconde bande adhésive trapézoïdale.

[* icon_note] The two small notched trapezoidal strips will be used to attach the home button bracket to the front panel.
-[* black] Carefully peel off the first trapezoidal adhesive strip with a pair of tweezers.
+[* black] Carefully peel off the first trapezoidal adhesive strip with a pair of [product|IF145-020|tweezers].
[* black] Using a pair of tweezers, place the first trapezoidal adhesive strip (minding its correct orientation) on the matching side of the home button mounting bracket.
[* icon_note] Make sure to line up the profile of the strip with the edge of the mounting bracket.
[* icon_reminder] Repeat the procedure for the second trapezoidal adhesive strip.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.