Aggiusta le tue cose Community Store

PSP 300x充电接口更换

Inglese
Cinese

Prerequisiti Guida

Tutte le guide prerequisite devono essere tradotte prima che questa traduzione sia considerata completa.

PSP 300x 电池更换

PSP 300x外壳更换

PSP 300xLCD屏幕更换

Informazioni Guida

= Fatto = Incompleto
    Guide for removing the power board in a Sony PSP-3000
    If your 3000-series PSP is having issues not turning on, this guide will explain how to replace the circuit board for the power switch.
    [br]
    When the power circuit board functions properly, the light next to the power switch should be illuminated after the PSP is turned on, even if there is no audio or video. A faulty circuit board can prevent the device from drawing power and beginning the startup sequence
    PSP batteries have had reported issues with swelling, so remember to visually inspect the battery cover for bulging before removing the battery. For more information on swollen batteries, click [[What to do with a swollen battery|here|new_window=true]].
    [br]
    Before getting started with this guide, ensure that the problem is actually the circuit board itself. Follow this guide up to Step 10 to disassemble the PSP, and inspect the switch to make sure the power button on the case activates the switch on the circuit. With the screen removed, also ensure that the silver ribbon cable has a firm connection both on the power board and on the motherboard. If the cables are loose, then they can be secured with electrical tape underneath the cable and away from the connectors.

      Passi guida

      Passo 1

      翻开锁，从电源接口上取下带状电缆。

      Passo 2

      从电源开关板上卸下螺丝。

      Passo 3

      卸下电源开关组件/板。

      I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.