Salta al contenuto principale

Sostituzione pulsante volume Nintendo 2DS

Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Nintendo 2DS Volume Slider Replacement: passo 0, immagine 1 di 3 Nintendo 2DS Volume Slider Replacement: passo 0, immagine 2 di 3 Nintendo 2DS Volume Slider Replacement: passo 0, immagine 3 di 3
  • Loosen the two screws on the upper back panel using a Phillips #00 screwdriver.

  • The screws are captive and will not detach from the back panel or separate from the panel upon removal.

  • Use a spudger to pry the upper back panel off, starting at the indent at the center top of the panel.

  • Use a spudger and work your way around the perimeter to release the clips and then lift the panel off.

Svita le due viti nel pannello posteriore in alto usando un cacciavite a croce Phillips #00.

Le viti sono viti imperdibili e non si staccano dal pannello posteriore neanche nel momento della rimozione.

Usa uno spudger per fare leva sul pannello posteriore superiore, partendo dalla rientranza al centro in alto.

Usa uno spudger e lavora lungo il perimetro per sganciare le clip e poi solleva il pannello.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.