Tektronix TBS1062 Oscilloscope Disassembly

Passo 1 — Removing the front panel

Remove all eight plastic buttons.

Passo 2 — Removing the back cover

Remove the power plug from the cover

Passo 3 — Power supply removal - ATTENTION

Even when disconnected, the power supply can retain a dangerously high voltage. Avoid contact with the rear of the board or other components. Use insulated electrician's gloves. Ensure that the capacitors are discharged before touching them.

Passo 4 — Control panel removal

Disconnect the black cable from the motherboard

Passo 5 — Removing the mainboard

Loosen the three nuts holding the signal connectors.

Passo 6 — LCD display removal

Disconnect the ribbon cable and the LCD backlight cable from the motherboard.